Siemens SINUMERIK 840D sl Operation/Programming Manual page 393

08/2005
9
Executing a G-code
program from the
diskette/USB/network-drive
...
-or-
Continue Execute
> HD
Cycle Start
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
9.3 Managing programs with PCU 50.3 (HMI Advanced)
Open the Program Manager.
Via the softkey, select the diskette/USB/network-drive or local
USB port.
Place the cursor on the directory that contains the G code
program you want to execute.
Press the "Input" or "Cursor right" key.
The directory opens.
Place the cursor on the G code program you want to execute.
Select the "Continue" and "Execute HD" softkeys.
ShopTurn now switches to "Machine Auto" mode and loads the G-
code program.
Press the "Cycle Start" key.
The machining of the workpiece is started (see Sec. "Machining a
workpiece".) The program contents are continuously reloaded into the
NCK work memory as the machining progresses.
Program Management
9
9-393