Siemens SINUMERIK 840D sl Operation/Programming Manual page 266

ShopTurn Functions
5
5.5 Milling
Peripheral surface Y:
C0 Reference point
Y0 Reference point in Y direction (abs.)
R Reference point on longitudinal polar axis (alternative to Y0) – (for curved alignment
only)
Z0 Reference point in Z direction (abs.)
α0
Reference point on angular polar axis (alternative to Z0) – (for curved alignment
only)
Reference point in X direction (abs.)
X0
Machining depth (inc.)
X1
Depth infeed rate
FX
Character height
W
Character spacing
DY1
Total width (alternative to DY1) – (for linear alignment only)
DY2
α1
Text direction (for linear alignment only)
α2
Arc angle (alternative to DY1) – (for curved alignment only)
Center point of arc (abs.) – (for curved alignment only)
YM
Center point of arc (abs.) – (for curved alignment only)
ZM
5-266
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
5
mm
mm
mm
mm
Degrees
mm
mm
mm/min
mm/tooth
mm
mm
mm
Degrees
Degrees
mm
mm
♥ Siemens AG, 2005. All rights reserved