Managing Programs With Shopturn - Siemens SINUMERIK 840D sl Operation/Programming Manual

Program Management
9

9.1 Managing programs with ShopTurn

9.1 Managing programs with ShopTurn
9-374
All the programs for workpiece machining that you have created in
ShopTurn are stored in the NCK-working memory.
You can access these programs at any time via the Program Manager
for execution, editing, copying, or renaming. Programs that you no
longer require can be deleted to release their storage space.
For exchanging programs and data with other workstations, ShopTurn
provides you with various options:

Own hard disk (PCU 50.3 only)

Compact Flash Card

Disk-drive (PCU 50.3 only)

USB network connection
The following sections explain either the program management of
ShopTurn on NCU (HMI Embedded) or the PCU 50.3 (HMI
Advanced).
Find out which version of ShopTurn you are running and then read
either section "Managing Programs with ShopTurn on NCU (HMI
Embedded)" or "Managing Programs with PCU 50.3".
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
9
♥ Siemens AG, 2005. All rights reserved