Siemens SINUMERIK 840D sl Operation/Programming Manual page 358

Tool Management
8
8.1 Tool lists, tool wear lists and the tool magazine
Tool wear list
Loc., Type, Tool Name,
DP
(D No.) edge
. Length X
. Length Z
. Radius or . ¬
TC
Pre-warning limit
Service life
Quantity
Wear
Tool condition
(last two columns)
8-358
You must enter the wear data for your tools in the tool wear list.
ShopTurn takes this data into account on machining the workpiece.
You can also activate tool monitoring here as well as disable tools or
identify them as oversized.
Tool wear list
Display of magazine loc. number, tool type, and cutting edge position,
text/number designation of the tool and duplo number
The displayed wear data is relative to the selected cutting edge of the
tool.
Wear in the X direction
Wear in the Z direction
Wear of the radius or diameter
Tool monitoring through service life (T),
quantity (C) or
wear (W)
Pre-warning limit of service life, quantity, or wear
Service life of the tool
Quantity of the finished workpieces
Maximum allowable tool wear
Tool is disabled for machining (G) or over-sized (U).
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
8
♥ Siemens AG, 2005. All rights reserved