Siemens SINUMERIK 840D sl Operation/Programming Manual page 142

Creating a ShopTurn Program
4
Teach TC
position
4-142
Press the "Teach TC position" softkey if you want to set the
current position of the tool as a tool change point.
The tool's coordinates are adopted by the parameters XT and ZT.
Press the "Accept" softkey.
The work plan is displayed.
ShopTurn has automatically defined the end of the program.
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
4
♥ Siemens AG, 2005. All rights reserved