ABB ACS800 Series Firmware Manual page 16

4
Select the language. The general parameter setting procedure is
described below.
The general parameter setting procedure:
- Press PAR to select the Parameter Mode of the panel.
- Press the double-arrow keys (
- Press the arrow keys (
- Select the value you would like to modify by pressing ENTER.
- Change the value using the arrow keys (
double-arrow keys (
- Press ENTER to accept the new value (brackets disappear).
Select the Application Macro. The general parameter setting
procedure is given above.
Enter the motor data from the motor nameplate:
ABB Motors
3 motor
M2AA 200 MLA 4
IEC 200 M/L 55
Hz kW
V
690 Y 50 30
400 D 50
30
660 Y
50
30
380 D 30
50
415 D 50 30
440 D 35
60
Cat. no
3GAA 202 001 - ADA
6312/C3
- motor nominal voltage
Allowed range: 1/2 · U
each of the nominal voltage ranges: 415 VAC for 400 VAC units, 500 VAC for 500
VAC units and 690 VAC for 600 VAC units.)
- motor nominal current
Allowed range: 1/6 · I
- motor nominal frequency
Range: 8...300 Hz
- motor nominal speed
...
Range: 1 18000 rpm
Start-up
START-UP DATA ENTERING (parameter group 99)
or ) to scroll the parameter groups.
or ) to scroll parameters within a group.
or ).
No
Ins.cl. F
IP 55
IA/IN t E/s
r/min A
cos
1475 32.5 0.83
1475 56 0.83
1470 34 0.83
1470 59 0.83
1475
54 0.83
1770 59 0.83
6210/C3 180
IEC 34-1
2 · U of ACS800. (U
N... N
2 · I of ACS 800
2hd... 2hd
or ), fast change using the
380 V
mains
voltage
refers to the highest voltage in
N
1 -> 0.0 rpm O
99 START-UP DATA
01 LANGUAGE
ENGLISH
1 -> 0.0 rpm O
99 START-UP DATA
01 LANGUAGE
[ENGLISH]
1 -> 0.0 rpm O
99 START-UP DATA
02 APPLICATION MACRO
[ ]
Note: Set the motor data to
exactly the same value as
on the motor nameplate.
For example, if the motor
nominal speed is 1440 rpm
on the nameplate, setting
the value of parameter
99.08 MOTOR NOM
SPEED to 1500 rpm will
result in incorrect operation
of the drive.
1 -> 0.0 rpm O
99 START-UP DATA
05 MOTOR NOM VOLTAGE
[ ]
1 -> 0.0 rpm O
99 START-UP DATA
06 MOTOR NOM CURRENT
[ ]
1 -> 0.0 rpm O
99 START-UP DATA
07 MOTOR NOM FREQ
[ ]
1 -> 0.0 rpm O
99 START-UP DATA
08 MOTOR NOM SPEED
[ ]