Programmable Analog Outputs; Update Cycles In The Control Program; Settings; Diagnostics - ABB ACS800 Series Firmware Manual

28

Programmable analog outputs

Two programmable current outputs are available as standard, and two outputs can
be added by using an optional Analog I/O Extension Module. Analog output signals
can be inverted and filtered.
The analog output signals can be proportional to motor speed, process speed
(scaled motor speed), output frequency, output current, motor torque, motor power,
etc.
It is possible to write a value to an analog output through a serial communication
link.

Update cycles in the Control Program

Output
AO / standard
AO / extension

Settings

Parameter
Group
Group
Group

Diagnostics

Actual Value
01.22,
01.28,
Warning
IO CONF
Program features
Cycle
50 ms
50 ms
15 ANALOG OUTPUTS
35 MTR TEMP MEAS
98 OPTION MODULES
Additional Information
01.23 Values of the standard outputs
01.29 Values of the optional outputs
Improper use of optional I/O
Additional Information
Value selection and processing (standard outputs)
Motor temperature measurement
Activation of optional I/O