Introduction To The Manual; Chapter Overview; Compatibility; Safety Instructions - ABB ACS800 Series Firmware Manual

Introduction to the manual

Chapter overview

The chapter includes a description of the contents of the manual. In addition it
contains information about the compatibility, safety, intended audience, and related
publications.

Compatibility

The manual is compatible with ACS800 Center Winder/Unwind Control Program
(Version BJXR3300 and above). See

Safety instructions

Follow all safety instructions delivered with the drive.
• Read the complete safety instructions before you install, commission, or use
the drive. The complete safety instructions are given at the beginning of the
Hardware Manual.
• Read the software function specific warnings and notes before changing the
default settings of the function. For each function, the warnings and notes are
given in this manual in the subsection describing the related user-adjustable
parameters.

Reader

The reader of the manual is expected to:
• know the standard electrical wiring practices, electronic components, and
electrical schematic symbols.
• have a firm understanding of winding and unwinding principles.

Contents

The manual consists of the following chapters:
• Start-up
• Control panel
• Program features
user settings and diagnostic signals.
• Master/Follower
drives that operate motors, which are interconnected by belts, gears, or chains.
• Application macros
connection diagram.
instructs in performing an ID Run.
gives instructions for using the panel.
contains the feature descriptions and the reference lists of the
describes the setup to even load systems with multiple ACS800
contains a short description of each macro together with a
33.01 SOFTWARE VERSION.
Introduction to the manual
1