How To Download Data From The Panel To A Drive; How To Set The Display Contrast - ABB ACS800 Series Firmware Manual

How to download data from the panel to a drive

Consider the notes in section
Step Action
1. Connect the panel containing the
uploaded data to the drive.
2. Ensure the drive is in local control (L
shown on the first row of the display). If
necessary, press the LOC/REM key to
change to local control.
3. Enter the Function Mode.
4. Select the download function (a flashing
cursor indicates the selected function).
5. Start the download.

How to set the display contrast

Step Action
1. Enter the Function Mode.
2. Select a function (a flashing cursor
indicates the selected function).
3. Enter the contrast setting function.
4. Adjust the contrast.
5.a Accept the selected value.
5.b Cancel the new setting and retain the
original value, press any of the mode
selection keys.
The selected mode is entered.
How to copy data from a drive to the panel
Press Key
LOC
REM
FUNC
ENTER
Press Key
FUNC
ENTER
ENTER
ACT
FUNC
above.
Display
1 L -> 1242.0 rpm I
FREQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
1 L -> 1242.0 rpm O
DOWNLOAD =>=>
Display
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
1 L -> 1242.0 rpm O
CONTRAST [4]
1 L -> 1242.0 rpm
CONTRAST [6]
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 6
1 L -> 1242.0 rpm O
UPLOAD <=<=
PAR
DOWNLOAD =>=>
CONTRAST 4
DRIVE
Control panel
19