Settings
Parameter
35.01...35.03
98.12
Other
Parameters
13.16...13.20
At the motor end the cable shield should be grounded through a 10 nF capacitor. If this is not
possible, the shield is to be left unconnected.
The NAIO module must also be connected to a power supply. See the module manual.
Diagnostics
Actual Values
01.35
02.15
02.18
02.20
Warnings
MOTOR 1 TEMP
T MEAS ALM
Faults
MOTOR 1 TEMP
Additional Information
Motor 1 temperature measurement
Activation of optional analog I/O
and
15.11...15.15
are not effective.
Additional Information
Temperature value
Warning bit state
Fault bit state
Fault bit state
Chapter
Fault tracing
and parameter
Chapter
Fault tracing
and parameter
Chapter
Fault tracing
and parameter
02.15
02.15
02.20
Program features
47