①
Insert plate
②
Mounting plate
③
Cover
④
Rear panel
⑤
Air discharge
⑥
Air inlet - filter with filter fan
⑦
To comply with degree of protection IP54, the surfaces
be sealed all round the circumference (e.g. Terostat-91 sealant from the Teroson company).
Figure 4-87
Example 2: mounting in the cabinet with mounting plate
It is recommended that you attach a cover and filter fan to the cabinet.
The filtered fan must be fitted in such a way that the cooling air required by the drive line-up
is not restricted. The overall cooling air requirement is obtained from the sum of the
individual components (see Chapter Technical data (Page 310)).
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
4.10 Smart Line Modules with external air cooling
⑥
between the mounting plate and the cabinet strip must
Line Modules Booksize
309