Double Motor Modules (300% Overload) - Siemens SINAMICS S120 Manual

Motor Modules Booksize
6.2 Motor Modules with internal air cooling
Note
Disturbance of the 18 A Single Motor Module with 300% overload during operation on a
16 kW Line Module
The maximum output of a 16 kW Line Module is not sufficient for the operation of an 18 A
Single Motor Module with 300% overload.
• Do NOT operate an 18 A Single Motor Module with a 16 kW Line Module with 300%
overload (i.e. only operate an 18 A Single Motor Module with a 16 kW Line Module, if the
maximum current is limited to 2 x I
• Use at least a 36 kW Active Line Module or Smart Line Module for operation with 300%
overload.
6.2.8.2

Double Motor Modules (300% overload)

Table 6- 15 Technical data Double Motor Modules Booksize (2 x 3 to 2 x 9 A) with 300% overload
Internal air cooling
Output current
Rated current (l )
n
Base-load current (I )
H
Intermittent duty current (I
Peak current (l )
max
Output voltage
DC link current I
d rated
DC-link voltage
(up to 2000 m above sea level)
DC-link capacitance
Overvoltage trip
Undervoltage trip
1)
Electronics power supply
Electronics current drawn
at 24 VDC
Current carrying capacity
DC-link busbars
Reinforced DC-link busbars
24 VDC busbars
Unit rating
2)
Based on I (600 VDC; 4 kHz)
n
Based on I
H
Total power loss
(including electronics losses, see Power loss
tables (Page 756))
Max. pulse frequency
without derating
with derating
Output frequency
376
6SL3120-
A
AC
A
) 40 % A
s6 AC
A
AC
V
AC
A
DC
V
DC
μF
V
DC
V
DC
V
DC
A
DC
A
DC
A
DC
A
kW
kW
W
kHz
kHz
Hz
).
rated
2TE13-0AA4 2TE15-0AA4
2 x 3 2 x 5
2 x 2.6 2 x 4.3
2 x 3.5 2 x 6
2 x 9 2 x 15
0 ... 0.717 x DC-link voltage
7.2 12
510 ... 720
24 (20.4 ... 28.8)
2 x 1.6 2 x 2.7
2 x 1.4 2 x 2.3
97.6 132.6
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
2TE21-0AA4
2 x 9
2 x 7.7
2 x 10
2 x 27
22
220
820 ± 2 %
380 ± 2 %
1.15
100
150
20
2 x 4.8
2 x 4.1
187.6
4
16
0 ... 550
Booksize Power Units