Siemens SINAMICS S120 Manual page 791

3. Push out the 8 expansion rivets.
5. Fix the fan with 8 new expansion rivets.
To install, carry out the above steps in reverse order. The torques must be carefully
observed.
Replacing the fan in an Active Interface Module, 36 kW
1. Open the fan cover. To do this, remove the combination
screws
M5 (3 Nm).
3. Release the connecting cable.
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
4. Remove the fan.
2. Open the fan cover and release the connector.
4. Remove the 7 expansion rivets.
Service and Support Booksize
14.1 Replacing the fan
791