Double Motor Modules (300% Overload) - Siemens SINAMICS S120 Manual

Motor Modules Booksize
6.4 Motor Modules with cold plate
Note
Disturbance of the 18 A Single Motor Module with 300% overload during operation on a
16 kW Line Module
The maximum output of a 16 kW Line Module is not sufficient for the operation of an 18 A
Single Motor Module with 300% overload.
• Do NOT operate an 18 A Single Motor Module with a 16 kW Line Module with 300%
overload (i.e. only operate an 18 A Single Motor Module with a 16 kW Line Module, if the
maximum current is limited to 2 x I
• Use at least a 36 kW Active Line Module or Smart Line Module for operation with 300%
overload.
6.4.8.2

Double Motor Modules (300% overload)

Table 6- 46 Technical data Double Motor Modules (2 x 3 to 2 x 9 A) with 300% overload
Cold plate
Output current
Rated current (I )
n
Base-load current (I )
H
Intermittent duty current (I
Peak current (I )
max
Output voltage
DC link current I
d rated
DC-link voltage (up to 2000 m above sea level)
DC-link capacitance
Overvoltage trip
Undervoltage trip
1)
Electronics power supply
Electronics current drawn
at 24 VDC
Current carrying capacity
DC-link busbar
Reinforced DC-link busbars
24 V busbar
Unit rating
2)
Based on I (600 VDC; 4 kHz)
n
Based on I
H
Total power loss
(including electronics losses, see Power loss
tables (Page 756))
Max. pulse frequency
without derating
with derating
Output frequency
Max. permissible heat sink temperature
440
) 40%
S6
).
rated
6SL3126- 2TE13-0AA4
A 2 x 3
AC
A 2 x 2.6
A 2 x 3.5
AC
A 2 x 9
AC
V
AC
A 7.2
DC
V
DC
μF 110
V
DC
V
DC
V
DC
A 0.9
DC
A 100
DC
A 150
DC
A 20
DC
kW 2 x 1.6
kW 2 x 1.4
W 91.6
kHz
kHz
Hz
° C 77
2TE15-0AA4
2 x 5
2 x 4.3
2 x 6
2 x 15
0 ... 480
12
510 ... 720
220
820 ± 2 %
380
24 (20.4 ... 28.8)
0.9
100
150
20
2 x 2.7
2 x 2.3
126.6
4
16
0 ... 550
77
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
2TE21-0AA4
2 x 9
2 x 7.7
2 x 10
2 x 27
22
220
0.9
100
150
20
2 x 4.8
2 x 4.1
181.6
77