X1 Line Connection; X21 Ep Terminals - Siemens SINAMICS S120 Manual

5.2.3.2

X1 line connection

Table 5- 1 X1 line connection
For ring cable lugs without insulation (Page 732)
1)
5.2.3.3

X21 EP terminals

Table 5- 2 X21 EP terminal / temperature sensor
Terminal
1
2
3
4
Type: Screw terminal 1 (Page 730)
The temperatures are detected but not evaluated in the Smart Line Module.
1)
For further information see SINAMICS S120, Commissioning Manual
2)
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
Terminal Technical data
U1 Supply voltage:
3 AC 380 ... 480 V, 50 / 60 Hz
V1
Type: Screw terminal 7 (Page 730)
W1
PE connection Threaded hole M5 / 3 Nm
Function
+ Temp
- Temp
EP +24 V (pulse enable)
EP M (Enable Pulses)
Line Modules Booksize Compact
5.2 Smart Line Modules Booksize Compact
1
Technical data
Temperature sensors: KTY84–1C130
PTC /bimetallic switch with NC contact
1)
The temperature sensor type and the temperature dis-
play can be selected via parameter and read-out.
Voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption, typical: 4 mA at 24 V
Isolated input
/ PT1000 /
1) 1)
2)
335