Siemens SINAMICS S120 Manual page 47

Table 2- 2 Modules
Line Modules in the booksize format
Max. permissible supply voltage
Rated pulse frequency
(for Active Line Modules in booksize format only)
Motor Modules in the booksize format
DC link supply voltage
Rated pulse frequency
Table 2- 3 Degree of protection / protection class
Degree of protection
Protection class
Power circuits
Electronic circuits
Table 2- 4 Environmental conditions
Chemically active substances
Long-term storage
Transport
Operation
Biological environmental conditions
Long-term storage
Transport
Operation
Climatic environmental conditions
Long-term storage
Transport
Operation
Mechanical environmental conditions
Long-term storage
Transport
Operation
Vibration test in operation
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
3 AC 480 V
8 kHz
510 ... 720 V DC
4 kHz
At higher pulse frequencies the corresponding characteristic
for current derating must be taken into consideration
IPXXB according to EN 60529, open type according to UL/CSA
I (with protective conductor connection)
safety extra-low voltage PELV/SELV
Class 1C2 according to EN 60721-3-1, in product packaging
Klasse 2C2 gemäß EN 60721-3-2, in transport packaging
Class 3C2 according to EN 60721-3-3
Class 1B1 according to EN 60721-3-1, in product packaging
Class 2B1 according to EN 60721-3-2, in transport packaging
Class 3B1 according to EN 60721-3-3
Class 1K4 according to EN 60721-3-1, in product packaging
Temperature: -25 ... +55 °C
Class 2K4 according to EN 0721-3-2, in product packaging
Temperature: -40 ... +70 °C
Class 3K3 according to EN 60721-3-3 with increased ruggedness with respect to
relative humidity
Temperature: 0 ... +40 °C without derating
> 40 ... +55 °C with reduction of the output current by 2.67 % pro °C
Relative humidity: 5 ... 95 % no condensation (better than Class 3K3)
Oil mist, salt mist, ice formation, condensation, dripping water, spraying water,
splashing water and water jets are not permitted
Class 1M2 according to EN 60721-3-1, in product packaging
Class 2M3 according to EN 60721-3-2, in transport packaging
Class 3M1 according to EN 60721-3-3
According to IEC 60068-2-6 test Fc (sinusoidal)
System overview
2.5 System data
1)
2)
1)
2)
1)
2)
1)
2)
47