Connecting A Direct Measuring System - Siemens SINAMICS S120 Manual

Cabinet design and EMC Booksize
12.7 Connection systems
12.7.1.6

Connecting a direct measuring system

The various options of connecting a direct measuring system with DRIVE-CLiQ ASIC and
M12 plug via MOTION-CONNECT cables to a DRIVE-CLiQ component are shown in the
following diagram.
1. Direct connection via the basic cable
2. Basic cable and 1-2 extensions
3. Basic cable, cabinet bushing and a maximum of one extension
①
②
③
④
I
II
Figure 12-27 Connecting a direct measuring system with M12 plug to a DRIVE-CLiQ component with
710
M12 socket (IP67) connected to a MOTION-CONNECT DRIVE-CLiQ signal cable
M12 plug (IP67) connected to a MOTION-CONNECT DRIVE-CLiQ signal cable
M12 plug (IP67) connected to a third-party measuring system
DRIVE-CLiQ cabinet bushing M12
Basic cable
Extension
RJ45 socket (IP20)
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8