Siemens SINUMERIK 840D sl Function Manual page 343

03.06
Fig. 9-2
Softkey Copy SI data
When the softkey is pressed, all NC machine data, relevant for the SI functions, is
transferred into the corresponding drive parameters.
The SI machine data/parameters to define the encoder mounting arrangement
must be separately entered for the NCK and drive by the commissioning engineer.
The copy function has no effect for the drive parameters marked in the Table 8-2
"Parameters for SINAMICS S120".
Drive data is automatically saved after data has been copied.
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
Softkey, all 840D sl axes
Commissioning
9.1 HMI screens and softkeys
9-343