Appendix - Siemens SINUMERIK 840D sl Function Manual

Appendix

A.1 Customer Support
The Centre of Competence Service (CoCS) – Sinumerik Safety Integrated
users a wide range of services.
Contact addresses
Hotline:
Contact:
Table A-1 Range of services for machinery construction OEMs and end customers
Portfolio
Concept development
Standard engineering
SPL configuration
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
Tel.: 0180-5050-222
Fax: 0180-5050-223
Email: ad.support@siemens.com
Enquiry with subject 840D Safety Integrated
Tel.: +49 (0)9131 98 4386
Fax: +49 (0)9131 98 1359
Description of the services available
The safety functions are adapted to the machine based on the hazard
analysis and the customer's operating philosophy. This includes e.g.:
S
Planned operating modes
S
Safety functions when the protective doors are closed
S
Safety functions when the protective doors are open
S
Emergency stop concept
S
A study of the safety-related external signals and elements
Based on the concept developed, the standard functions
S
Safe standstill (SH), safe operating stop (SBH)
S
Safely-reduced speed (SG)
are integrated into the circuit diagram of the machine. External safety
elements (e.g. door interlocking, Emergency Stop button, ...) are either
configured conventionally or logically combined using the "safe
programmable logic" (SPL) function.
Based on the standard configuration, the following objects are created:
S
Function diagram
S
Logic program for the PLC area
S
Logic program for the NC area
S
Data blocks required (e.g. DB 18)
These objects are incorporated/linked into the complete system.
A
®
offers
A-487