Siemens SINUMERIK 840D sl Function Manual page 393

03.06
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
10.2 NCK safety alarms for Sinumerik 840D sl
– 25
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[2] + MD
36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
– 26
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[2] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 27
The setting in MD 36936 $MA_SAFE_CAM_POS_PLUS[3]
+ MD 36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
– 28
The setting in MD 36936 $MA_SAFE_CAM_POS_PLUS[3] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 29
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[3] + MD
36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
– 30
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[3] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 31
The settings in MD 36942 $MA_SAFE_POS_TOL. and MD 36949
$MA_SAFE_SLIP_VELO_TOL do not correspond with the associated
drive parameter assignment.
Remedy
Copy SI data.
– 32
The setting in MD 36944 $MA_SAFE_REFP_POS_TOL does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 33
The setting in MD 36951 $MA_SAFE_VELO_SWITCH_DELAY does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
Diagnostics
10-393