Siemens SINUMERIK 840D sl Function Manual page 398

Diagnostics 03.06
10.2 NCK safety alarms for Sinumerik 840D sl
The STOP of the active request is specified as detailed fault code for
the NCK and drive.
The following values are possible:
0 = No Stop
2 = Stop E
3 = Stop D
4 = Stop C
7 = Stop A
– 59
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[0] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 60
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[1] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 61
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[2] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 62
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[3] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 63
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[4] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 64
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[5] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 65
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[6] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 66
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[7] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
© Siemens AG, 2006. All rights reserved
10-398
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition