Toshiba Q9+ Installation & Operation Manual page 274

Input
Function Function Name
Command
NOP (No Opera-
0
tion)
1 ST
2 STN
3 AND
4 ANDN
5 OR
6 ORN
7 EQ
8 NE
9 GT
10 GE
11 LT
12 LE
13 ASUB
FB_ON_DELAY
14
(Timer)
FB_OFF_DELAY
15
(Timer)
FB_COUNTER1
16
(Timer)
FB_COUNTER2
17
(Timer)
18 FB_PEEK_HOLD
19 SET
20 RESET
21 CLR
22 CLRN
262
Direct Access Parameter Information
Q9 Plus ASD Install/Op Manual
Table 15. My Function Operator Selections.
My Function Computational Selections
Function Description
Disables the My Function feature.
Execute data read/transfer.
Execute inverted data read/transfer.
Logical product of A AND B.
Logical product of A AND B.
Logical sum of A OR B.
Logical sum of A OR B.
Compares data — Outputs 1 if Equal; 0 if not Equal.
Compares data — Outputs 0 if Equal; 1 if not Equal.
Compares data — Outputs 1 if A>B; 0 if AB.
Compares data — Outputs 1 if AB; 0 if AB.
Compares data — Outputs 1 if AB; 0 if AB.
Compares data — Outputs 1 if AB; 0 if A>B.
Outputs absolute difference between A and B — |A–B|
Enables the On response time delay settings of My Function Time
Data 1 – 5 (F928 –
Enables the Off response time delay settings of My Function Time
Data 1 – 5 (F928
Outputs a 1 upon reaching the pulse count setting of F933.
Outputs a 1 upon reaching the pulse count setting of F934.
Outputs the peak output value since powering up or since the last
reset.
Sets data.
Resets data.
Clears data.
Retains data.
F932) for My Function Data.
– F932) for My Function Data.
https://www.toshiba.com/tic/