Huawei AP8082DN Hardware Installation And Maintenance Manual page 12

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Indicat
or
LINK/ACT Indicators
LINK/ACT indicators consist of LINK/ACT0, LINK/ACT1, and LINK/ACT2, showing the
link status of interfaces 5GE/PoE_IN, GE/PoE_OUT, SFP respectively.
Table 1-3 Description about the LINK/ACT indicators
Type
The AP
serves as a
PSE to
supply
power to
PDs
through
the
PoE_OUT
port.
The AP
does not
provide
Issue 03 (2019-04-01)
Name Color
Green
Red
Color Status
Green Steady on
Blinking
Yellow Steady on
Off
Blinking
Green Steady on
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking Alarm.
once
l The software is being upgraded.
every
l After the software is loaded and started,
0.25s (4
the AP requests to go online if it works
Hz)
in Fit AP or cloud-based management
mode. The indicator remains in this state
before the AP successfully goes online.
l The AP works in Fit AP or cloud-based
management mode and fails to go
online.
Steady Fault.
on
A fault that affects services has occurred,
such as a DRAM detection failure or system
software loading failure. The fault cannot be
automatically rectified and must be rectified
manually.
Description
The Ethernet connection is normal, and no data is
being transmitted. The PoE OUT function is
available.
The Ethernet connection is normal, and the AP is
transmitting data. The indicator blinks more
quickly when more data is being transmitted. The
PoE OUT function is available.
The Ethernet connection fails, and the PoE OUT
function is unavailable.
The Ethernet connection fails, and the PoE OUT
function is available.
The Ethernet connection fails, and the PoE OUT
function is faulty.
The Ethernet connection is normal, and no data is
being transmitted.
1 Product Overview
5