Installing Fiber Connectors; Cleaning Fiber Connectors; Installing An Fc Fiber Connector - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown
in Figure
Figure 6-129 Removing an unshielded Ethernet connector
----End

6.1.5.4 Installing Fiber Connectors

Context
l After you remove the dustproof cap, ensure that the fiber pins are clean and install them as
l When you disassemble fiber connectors, you must use a dedicated tool if the connectors

6.1.5.4.1 Cleaning Fiber Connectors

Procedure
Step 1 Clean the pins of a fiber connector by using lint-free cotton and alcohol.
Step 2 Clean the pins again by using dust-free cotton. If necessary, clean the pins by using an air gun.
Ensure that the pins are free from any fiber or debris.
----End

6.1.5.4.2 Installing an FC Fiber Connector

Issue 03 (2019-04-01)
6-129.
soon as possible.
are densely installed.
Copyright © Huawei Technologies Co., Ltd.
6 Appendix
120