Table of Contents
Advertisement
AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
l When fixing the sheet metal mounting bracket, ensure that the arrows point upwards on the
l The length of the M6 inner hexagon screwdrivers must be greater than or equal to 200 mm.
l The adjustment range of the angle-adjustable mounting bracket for the AP8082DN is as follows:
l For details about how to install an enclosure, see
Installing an AP8082DN
1.
2.
Issue 03 (2019-04-01)
NOTE
l
Without an enclosure: The adjustment range of the vertical angle is ±30°, and that of the horizontal
angle is ±40°.
l
With an enclosure: The adjustment range of the vertical angle is -20° to +30°, and that of the
horizontal angle is ±40°.
Determine the AP installation position and attach the pole-side mounting bracket on the
pole using the hose clamp.
a.
Use an M6 inner hex torque screwdriver to loosen the screw on the hose clamp to
open it.
b.
Lead the hose clamp through the mounting bracket and secure the mounting bracket
to the pole.
c.
Tighten and close the hose clamp.
d.
Use an M6 inner hex torque screwdriver to tighten the screw.
Use four M4x14 hexagon socket head cap screws to fasten the AP-side mounting bracket
to the AP.
Copyright © Huawei Technologies Co., Ltd.
2.5.3 Installing an Enclosure for an
a
b
c
M6
d
2 AP Installation
label.
AP.
5 N•m
23
Advertisement
Table of Contents
