Huawei AP8082DN Hardware Installation And Maintenance Manual page 83

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-46 Putting the connector body onto the wire holder
Step 9 Push the metal shell toward the connector body until the wire holder and the connector body
are engaged completely. Crimp the connector, as shown in
Figure 6-47 Crimping the connector
Step 10 Push the jacket towards the metal shell until the metal shell is covered. This completes the
assembly of one end of the cable, as shown in
Figure 6-48 Pushing the metal shell
Issue 03 (2019-04-01) Copyright © Huawei Technologies Co., Ltd.
Figure 6-47.
Figure 6-48.
6 Appendix
76