Huawei AP8082DN Hardware Installation And Maintenance Manual page 62

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-8 Tightening the nut
Step 8 Use a multimeter to check the connectivity of the 2-pin round connector's cable components,
as shown in
Figure 6-9 Checking connectivity
The connectivity meets standards if the following conditions are met:
l
l
l
l
Step 9 If devices are installed outdoor, wrap three layers of PVC insulation tape around the
connector for protection, as shown in
Ensure that proper quantity of the PVC insulation tape is used for wrapping the connector,
facilitating the connector uninstallation in later maintenance.
Issue 03 (2019-04-01)
Figure 6-9.
Positive and negative holes of the connector are not short-circuited.
The metal enclosure and connector's holes are not short-circuited.
The cable shield layer is properly connected to the metal enclosure.
Core wires are properly connected to the connector's holes.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-10.
6 Appendix
55