Labels For The Optical Fibers Connecting The Device And An Odf - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
The meaning of the label is listed in
l
l

6.4.2.2 Labels for the Optical Fibers Connecting the Device and an ODF

Meaning of the Labels
Table 6-28
device and an optical distribution frame (ODF).
Table 6-28 Information on labels affixed to a fiber between a device and an ODF
Content
MN-B-C-D-
R/T
ODF-MN-B-
C-R/T
Issue 03 (2019-04-01)
"A01-01-05-01-R" indicates that the local end of the optical fiber is connected to the
optical receiving interface 01 in slot 5, chassis 01 in the cabinet in row A, column 01 in
the machine room.
"G01-01-01-01-T" indicates that the opposite end of the optical fiber is connected with
optical transmitting interface 01 in slot 01, chassis 01 in the cabinet in row G, column 01
in the machine room.
shows information on both sides of labels attached to an optical fiber between a
Meaning
MN: cabinet
number
B: chassis
number
C: physical slot
number
D: optical
interface
number.
R: Optical
receiving
interface
T: optical
transmitting
interface
MN: row
number and
column number
of an ODF
B: row number
of the terminal
device
Copyright © Huawei Technologies Co., Ltd.
Figure 6-161.
Example
For example, A01.
Numbered in bottom-up order with two digits, for
example, 01.
Numbered in top-down and left-right order starting
from 01. For example, 01 is the first slot at the top left
of the chassis.
Numbered in top-down and left-right order, consistent
with the port sequence number on the device.
-
M: The cabinet rows from front to back are numbered
from A to Z.
N: The cabinet columns from left to right are
numbered from 01 to 99.
For example, G01 is the ODF of row G and column
01.
Range from 01 to 99, for example, 01-01.
6 Appendix
152