Table of Contents
Advertisement
AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Procedure
Step 1 Remove a 16-mm (0.63 in.) long section of the jacket, as shown in
When you remove the shield layer, do not damage the insulation of the twisted-pair cable.
Figure 6-76 Removing the jacket of a twisted-pair cable (unit: mm (in.))
Step 2 Align the four pairs of wires and cut the ends neatly, as shown in
connections between the wires and the pins are listed in
Figure 6-77 Connections between wires and pins (unit: mm (in.))
Pin 8
Table 6-9 Connections between wires and pins (using a straight-through cable as an example)
Matching Pins of Wires
1
2
3
4
5
6
7
Issue 03 (2019-04-01)
Pin 1
Copyright © Huawei Technologies Co., Ltd.
Table
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
Wire Color
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Figure
6-76.
Figure
6-77. The
6-9.
C
16
6 Appendix
91
Advertisement
Table of Contents
