Huawei AP8082DN Hardware Installation And Maintenance Manual page 87

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-53 Neatly cutting edge cables
Step 5 Insert the load bar into the RJ45 connector, as shown in
Figure 6-54 Inserting the load bar into the RJ45 connector
Cables must be inserted into the bottom of the connector, which can be checked on the side or
front end face of the connector.
Step 6 Use the crimping tool to crimp the connector, as shown in
neatly cut braid shields exposed out of the connector along the load bar, as shown in
6-56.
Figure 6-55 Crimping the connector
Issue 03 (2019-04-01) Copyright © Huawei Technologies Co., Ltd.
Figure 6-54.
Figure 6-55. Use cutting pliers to
6 Appendix
Figure
80