Table of Contents
Advertisement
AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Parameter
Stop bits (S)
Flow control (F)
User name
Password
In versions earlier than V200R009C00, when you log in to a cloud AP through the console port, no default
user name or password is available. Upon your first login, configure the login password.
Connecting to an AP
You can connect a PC to the console port of an AP through a console cable.
Figure 6-180 Connecting to an AP through a console cable
Logging In to the AP
Step 1 Start terminal emulation software on the PC, create a connection, and set communication
parameters according to
Step 2 Press Enter, enter authentication information as prompted, and log in to the user interface.
(The following information is for reference only.)
For a Fit or cloud AP, enter the default user name admin and password admin@huawei.com.
You are advised to change the default user name and password upon your first login.
Login authentication
Username: admin
Password:
Info: You are advised to change the password to ensure security.
For a Fat AP, you need to set the console login password upon the first login, and then log in
using this password.
Please configure the login password:
Info: A plain text password is a string of 8 to 16 case-sensitive characters and
Issue 03 (2019-04-01)
NOTE
Table
Copyright © Huawei Technologies Co., Ltd.
Default Value
1
None
Fit AP and cloud AP: admin
Fat AP: None
Fit AP and cloud AP: admin@huawei.com
Fat AP: None (configured when the user
logs in for the first time)
6-42.
6 Appendix
191
Advertisement
Table of Contents
