Huawei AP8082DN Hardware Installation And Maintenance Manual page 61

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-5 Tightening the crimping screws
Step 5 Close the clip and tighten the screw to compact the shield layer, as shown in
Figure 6-6 Compacting the shield layer
Step 6 Pre-tighten the socket and enclosure and use the Phillips screwdriver to tighten the socket
with the tightening torque no less than 1.2 N•m, as shown in
Figure 6-7 Tightening the socket
Step 7 Pre-tighten the socket and nut and use the Phillips screwdriver to tighten the nut with the
tightening torque no less than 1.2 N•m, as shown in
Issue 03 (2019-04-01) Copyright © Huawei Technologies Co., Ltd.
Figure 6-7.
Figure 6-8.
6 Appendix
Figure 6-6.
54