Connecting The Security Lock; Checking The Ap After Installation - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide

2.7 Connecting the Security Lock

There is a security slot on the device. You can lock the device to an immovable object to
prevent theft. The detailed procedures are as follows:
1.
2.
You need to purchase the security lock separately.

2.8 Checking the AP After Installation

Table 2-6
see Installation Checklist in the appendix.
Table 2-6 AP installation checklist
No.
1
2
3
4
5
6
Issue 03 (2019-04-01)
Fasten the cable of the security lock to an immovable object around.
Insert the security lock into the security slot and lock it.
NOTE
shows the items to be checked after AP installation is complete. For more details,
Check Item
The AP is installed by strictly following the design draft. The
installation position meets space requirements, with maintenance space
reserved.
The AP is securely installed.
Waterproof caps are installed on idle interfaces and securely fastened.
The power cables and PGND cables are intact and not spliced.
Terminals of the power cables and PGND cables are welded or cramped
firmly.
All power cables or PGND cables are not short-circuited or reversely
connected and must be intact with no damage.
Copyright © Huawei Technologies Co., Ltd.
Security lock
2 AP Installation
41