Table of Contents
Advertisement
AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 2-11 Installing an omnidirectional outdoor antenna against a pole
Omnidirectional
antenna
Installing Omnidirectional Outdoor Antennas on an AP
Figure 2-12
antenna to an AP with a tightening torque of 0.8 Nm.
Figure 2-12 Installing omnidirectional outdoor antennas on an AP
Issue 03 (2019-04-01)
Protection
angle
>1.0m
Hose clamp
Antenna pole
NOTE
If antennas are installed on a metal pole such as a steel pole, you do not need to install a lightening rod,
as shown on the right in
Figure
shows installation of omnidirectional outdoor antennas on an AP. Tighten an
Copyright © Huawei Technologies Co., Ltd.
Lightning rod
2-11.
2 AP Installation
40
Advertisement
Table of Contents
