Huawei NetCol8000-C070 User Manual page 131

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
2.
Step 4 Add an SNMPv3 user.
1.
2.
3.
4.
5.
Step 5 Tap the text box after SNMP Port, as shown in
actual port number, tap
Issue 09 (2022-12-15)
Tap the text box next to Write Community, set the write community
parameter based on the actual plan, tap
Tap Add under SNMP V3.
Set User Name, Auth Protocol, and Prop Protocol based on the actual plan.
MD5 and DES protocols are not secure. It is recommended that you set Auth
Protocol to SHA2-512, and set Prop Protocol to AES-256. The following
operations use the recommended settings as an example.
Figure 4-11 Setting the protocol type
NO TICE
Passwords of an authentication protocol and proprietary protocol must
comply with the following policies:
– The password must contain at least two types of characters among
uppercase letters (A–Z), lowercase letters (a–z), and digits (0–9). The
password must contain 8 to 15 characters and be different from the user
name or its reverse.
– A password must not be a string containing duplicate sections, such as
12a12a12a.
– Weak passwords such as Password, Admin_1243, and Changeme_123 are
not allowed.
Set SHA Password and Confirm Password as planned.
Set AES Password and Confirm Password as planned.
Tap Submit.
Copyright © Huawei Digital Power Technologies Co., Ltd.
, and tap Submit.
Figure
, and then tap Submit.
4 Power-On Commissioning
4-12. Set SNMP Port to the
121