Huawei NetCol8000-C070 User Manual page 145

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Step 2 Set LAN parameters.
1.
2.
3.
4.
5.
Step 3 Log in to the WebUI of the unit.
1.
Issue 09 (2022-12-15)
c. Configure the PC IP address and the IP address of the unit in the same
network segment.
For example, if the WAN IP address of the unit is 172.017.248.10, the
subnet mask is 255.255.255.000, and the default gateway is
172.017.248.1, set the IP address of the PC to 172.017.248.12, the subnet
mask to 255.255.255.000, and the default gateway to 172.017.248.1.
NO TE
The WAN IP address cannot be in the 192.168.245.X, 192.168.246.X, or
192.168.248.X network segment.
NO TE
● If the unit connects to a LAN and a proxy server has been selected, perform
and Step 2.4.
● If the unit connects to the Internet, and the PC in a LAN accesses the Internet over a
proxy server, do not perform
WebUI.
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.2 and Use TLS1.3.
(Optional) Click the Connections tab and select LAN settings.
(Optional) Under Proxy server, deselect Use a proxy server for your LAN.
Figure 5-1 Setting the proxy server
Click OK.
Enter https://IP address (such as https://192.168.0.10) in the address box of
the browser, and then press Enter to enter the WebUI login page.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Step 2.3 or Step 2.4. Otherwise, you will fail to access the
5 WebUI
Step 2.3
135