Replacing An Electric Heater (For A Downflow Model) - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Step 4 Remove the two bolts that secure the electric heater support and take out the
electric heater.
Figure 6-16 Removing an electric heater
Step 5 Remove the four bolts from both ends of the electric heater and take out the
electric heater and its cable.
Figure 6-17 Electric heater position
Step 6 Install and secure the new electric heater by performing
the fan maintenance baffle and close the front door.
Step 7 Power on the device, tap Start on the home screen, choose Maintenance >
Startup Wizard, and commission the electric heater to check that it works
properly before you exit.
Step 8 On the home screen, choose Maintenance > Performance Maintenance to enter
the performance maintenance screen and clear the runtime of the electric heater.
----End

6.4.3.2 Replacing an Electric Heater (for a Downflow Model)

Step 1 Tap Shutdown on the home screen of the display module.
Issue 09 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Maintenance
Step 5 to Step 3. Install
157