Cabinet Hole Positions - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual

3.5.1 Cabinet Hole Positions

● Pipes only can be routed from the bottom of the downflow units. Pipes can be
routed from the side or bottom of the upflow units. Knock off the padding of
holes at the proper positions based on the onsite pipe routing method, and
route the pipes through the holes.
● Cables can be routed from the bottom or side of the upflow units and cables
can be routed from the bottom of the downflow units. Select appropriate holes
for routing cables based on the onsite cable routes.
Holes in the Side Panel of an Upflow Unit
Figure 3-20 Holes in the side panel of an upflow unit (unit: mm)
(1) Drainpipe hole
(3) Chilled water inlet
pipe hole
(5) Chilled water
outlet pipe hole
(7) Standby power
cable hole
Issue 09 (2022-12-15)
NO TICE
(2) Signal cable
hole
(4) Humidifier
water inlet pipe
hole
(6) Active power
cable hole
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
58