NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
6.4.10 Replacing a T/H Sensor
Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Step 2 Open the front door.
Step 3 Remove the cable terminals from the ports on the T/H sensor.
Step 4 Pull out the T/H sensor in the direction.
Figure 6-32 Replacing aT/H sensor (upflow)
Issue 09 (2022-12-15)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Maintenance
170