NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Scenario
NOTE
● For shutdown commands, the remote start/shutdown signal of the hardware port has
● If ON/OFF via NMS is disabled on the LCD of the unit, the unit cannot be started or
Figure 7-1 Start/Shutdown over the LCD
Figure 7-2 Start/Shutdown over the NetEco WebUI
Figure 7-3 Start/Shutdown over the hardware port
Issue 09 (2022-12-15)
Operation
the highest priority, and that of the LCD and NetEco WebUI has the same priority.
shut down over the NetEco.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Start/Shutdown
Start/Shutdown
Signal Status -
Signal Status -
LCD/NetEco
Hardware Port
WebUI
7 FAQ
173