NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 6-5 Removing a fan
Step 6 Remove the connection box cover using a security torx wrench.
Figure 6-6 Removing a connection box cover
Step 7 Open the connection box. Hold the area marked by gray in the following figure
using a small flat-head screwdriver, remove the signal cable and power cable
shown in the following figure, and then remove the screw in the area marked by
yellow (namely, the PE cable) using a flat-head screwdriver.
Issue 09 (2022-12-15)
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Maintenance
149