NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Step 3 Apply thread sealant to the joints of the outer screw threads of the external pipe,
as shown by (2) in
Step 4 Connect the water pipe by using a 75# open-end wrench and an 18# pipe wrench,
as shown by (3) in
Figure 3-23 Connecting pipes
Step 5 Paste the thermal insulation foam on the pipe and install the cover plate for the
left side knock-out hole.
----End
3.5.2.2 Downflow
Context
Tools: 75# open-end wrench, 36# open-end wrench, 18# pipe wrench, sealant
(used for pasting thermal insulation foam), screw thread sealant.
Procedure
Step 1 Remove the baffle plate at the bottom of the cabinet, and knock off the U-shaped
hole in the baffle plate, as shown by (1) in
Issue 09 (2022-12-15)
Figure
Figure
NO TE
The figure uses side pipe routing as an example. If bottom pipe routing is used, purchase
right angle elbows with DN50 outer threads onsite.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3-23.
3-23.
Figure
3 Installation
3-24.
61