NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 3-48 Connecting communications cables
----End
3.6.5 (Optional) Installing Cables for the External Water Valve
Actuator
Context
●
●
Procedure
Step 1 Route the cables of the water valve actuator through the hole on the unit
according to the route shown in the figure.
Step 2 Connect the cables of the water valve actuator to the specified ports of the unit
based on the mapping.
Issue 09 (2022-12-15)
The installation position of the water valve actuator depends on site
requirements. This section describes only the cable connection method and
route.
Before connecting the cable, ensure that the water valve actuator is correctly
installed.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
80