GE Voluson S6 Basic User Manual page 166

M Mode
7.5.2 MTD Operation
7.5.2.1 Color Box Size and Cursor Position
7.5.2.2 Activation of MTD Mode
7-14
Remarks:
•
In freeze mode changing the PRF and Gain is not possible.
•
In MTD mode only one focus zone is available.
•
When the MTD-box is moved, the focus position is set to the center of the Color box.
The MTD operations:
•
'Color Box Size and Cursor Position'
•
'Activation of MTD Mode'
•
on page 7-15
'MTD Gain Control'
•
on page 7-10
'MCF Operation'
•
on page 7-10
'MCF Operation'
•
on page 7-15
'MTD Cineloop'
All further image-optimizing functions are the same as those of the M mode. 'M Operation'
page 7-3
After pressing the [TD] and the [M] control adjust the Color box size and the cursor position
using the trackball in the 2D single image.
The upper trackball key changes between cursor position and Color box size and vice versa.
Press the right or left trackball key and 2D mode and MTD mode trace are active.
The screen is divided asymmetrically into two frames. The 2D image appears in the top
frame. The M mode trace appears in the lower frame.
The menu area shows the "MTD Main" menu. Two display formats and three display sizes are
possible:
•
on page 7-8
'Display Format'
on page 7-14
on page 7-14
on
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4