GE Voluson S6 Basic User Manual page 89

Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
2. Select the same word from the screen using the trackball. The selected word appears at
the cursor position. Select a new word, (a "blank" is inserted between the prior and new
word) or enter a character using the keyboard (a "blank" is inserted between the prior
word and the new character).
Text function is switched off but the entered text is not cleared. Return to the last active menu.
Clicking the [A] button on the screen, or the [Text A] key on the keyboard displays the Text
Layer A, and makes it available for modification and deletion.
Clicking the [B] button on the screen, or the [Text B] key on the keyboard displays the Text
Layer B, and makes it available for modification.and deletion.
Clicking the [A+B] button on the screen, displays both layers at the same time. Pressing the
button again untoggles the function and only the pre-selected layer will be displayed.
Pressing the [Hide Text] button, hides the text of all layers on the screen as well as on printer,
report and VCR, but does not delete it.
This key has two functions:
1. Turning the digipot highlights the words of the pre-selected layer one after the other.
2. Pressing the digipot deletes the highlighted word. Pressing [Delete, Backspace] on the
keyboard also deletes the highlighted word.
Pressing the upper trackball key highlights the words of the pre-selected layer one after the
other.
All the text of the preselected layer in the annotation area is cleared.
The 1 st , 2 nd .... page of auto text words appears. 1 : current page / (2) : number of available
pages
Press an application key to select different application-related terms.
Please note:
The main application (chosen in the "Probe Selection" menu) does not change! After selecting
the [Appl.] key the screen menu changes to the "Application Select" menu. When a "main"
application in the "Probe Selection" menu is selected, the text application is set (changed) to
this application.
Remarks:
•
The position of the cursor ("Home" position) can be changed by either:
•
Trackball
•
[Enter] key (next line), or [Backspace] key (deletes the last character)
Operating the System
4-29