Advertisement
Note
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
1.
Press the [Calc] key on the control panel.
2.
Select the desired item. For example: select [Left Renal Artery].
3.
Select the appropriate measurement parameter [Vessel Area] or [Vessel Diameter].
4.
Use the trackball to move the cursor to the start point of the measurement and press the
right or left trackball key [Set] to fix the marker. A second cursor appears.
5.
Move the second cursor to the second point of the measurement and press [Set] again.
To re-adjust the start point, press the upper trackball key [Change] before completing the
measurement. This alternates the control from one cursor to the other.
6.
Only if [Vessel Area] is selected, adjust the width of the ellipse by means of the trackball
and then press the right trackball key [Set] again.
Measurements and Patient Worksheets (Reports)
11-27
Hide quick links:
Advertisement
Chapters
