GE Voluson S6 Basic User Manual page 429

11.2.4.21 Obstetric - Subcategory: Fetal Echo
11.2.4.22 Items of Obstetric Calculations - Subcategory: Fetal Echo
11.2.4.23 Obstetric - Worksheet
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
3. Define the reference line, using the trackball. Accept with left or right trackball.
4. Measure the all areas. When the measurement is done the next line will be highlighted. If
the last area is measured press the Done button.
5. If necessary correct the measurements.
6. Press Done to finish the measurement.
This subcategory allows you to measure the fetal heart.
Application "Obstetric", (Factory - Sub Category: Fetal Echo) allows measurements/
calculations in 2D/3D mode using various measure items. For details about settings, review:
Measure Setup - Measure & Calc
The methods for obtaining measurements (e.g., Aortic Arch View, etc.) in the Obstetric
Calculations menu are similar to the generic measurement functions in 2D.
The items of obstetric calculations in each mode are as follows:
2D/3D Mode: 4 Chamber View, Thorax, Outflow Tract, Aortic Arch,
Venous, LVOT, RVOT
M Mode: 4 Chamber View, Outflow Tract
, FHR
Doppler Mode: Tricuspid Valve, Mitral Valve, Main Pulmonary Artery,
Aorta, Ductus Art., Umbilical Vein, Ductus Venosus,
FHR, LVOT, RVOT, Pulmonary Veins, Pulmonary
Valve, Aortic Valve
Description of Abbreviations review:
Press the [Worksheet] key on the control panel to view the report that contains detailed results
of obstetric calculations.
Measurements and Patient Worksheets (Reports)
(chapter 'The Measure Setup Pages' on page 11-109 )
Chapter 17
11-53