GE Voluson S6 Basic User Manual page 576

Utilities and System Setup
13.2.5 Connectivity
13.2.5.1 Peripherals
Note
13-30
Recorder Type:
Add Printer:
Printer Settings
These printer settings solely refer to printing jobs initiated with the [End Exam] button. If you
want to change the settings for print jobs initiated with the Px buttons or from Archive, please
refer to 'Data Transfer Menu' on page 12-25
Report Printer:
Printer Queue:
Foot Switch left/right:
Default
Only internal DVR is possible.
Allows you to install a new printer and opens the Windows"
Add Printer Wizard".
Select a printer from the drop down menu and then press
[Edit], to edit the printer settings under "Windows Properties".
If you want to restore default values, select the printer and
press the [Default] button.
Select the desired Report Printer from the drop-down menu.
Only one selection is possible.
The selected printer is used for printing reports and images
from Archive.
Select a printer from the drop down menu and press [Clean
Print Queue] to delete all jobs on the selected printer.
If you select the checkbox [Select All Printers] the drop down
menu will no longer be available. Press [Clean Print Queue] to
delete all jobs on all printers installed on the system. You will
be asked to confirm whether you want delete the printer
queue.
Selection of the appropriate function. For each Foot Switch
half, only one selection is possible.
Load the default printer settings.
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4