GE Voluson S6 Basic User Manual page 538

Archive
12.5.1.1 Exam Review Screen
12.5.2 End Exam
12.5.2.1 Setup Switch "End Exam Dialog" OFF
12.5.2.2 Setup Switch "End Exam Dialog" ON
Note
12-34
End Exam function is done immediately when pressing the above buttons.
•
If an incomplete measurement exists, a dialog window appears on screen:
•
If no incomplete measurement exists, another dialog window appears on screen.
In both cases pressing [Yes] or [No] leads to the same result:
No: Dialog window disappears (current state as before)
Yes: "End Exam" command is executed and dialog window disappears.
"End Exam" command is also executed if [End Exam] button is pressed again when dialog
window is present.
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4