GE Voluson S6 Basic User Manual page 379

11.1.1 Basic Operations
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
•
M Mode measurements
•
D Mode measurements
Additional functions in the "Generic Measurement" menu:
•
To Change the Measurement Applications
on page 11-20 )
Application'
•
To Review the Generic Work Sheet
page 11-21 )
By pressing the [Caliper] key on the control panel the Generic Measurement function is
switched on. The menu area display depends on the acquisition mode and the "Generic"
settings in the Measure Setup. For details, review: Measure & Calc
on page 11-109 )
Setup Pages'
Positioning of measuring marks is done with the trackball.
Entering and storage of measuring marks is done with the right or left trackball key [Set].
To change measuring marks before completion press the upper trackball key [Change]. If
you want to readjust a traced line, press the upper trackball key [Undo] repeatedly.
The status bar area shows the current function of the trackball.
To cancel the measurement of the currently selected item, select the [Cancel] button on the
menu area.
Measurements and Patient Worksheets (Reports)
(chapter 'M-Mode Measurements' on page 11-14 )
(chapter 'D-Mode Measurements' on page 11-16 )
(chapter 'To Change the Measurement
(chapter 'To Review the Generic Work Sheet' on
(chapter 'The Measure
11-3